IPDS Overview
AXIS 5570e User’s Manual
193
Optimize Duplex
Use this option to optimize duplex print jobs. Optimization means that
sheets are printed in simplex if the reverse side of the sheet is empty,
resulting in higher throughput.
Important:
N-up
The N-up parameter defines if 1, 2 or 4 pages in your document are to be
printed on each physical page.
Default output bin
This selection defines which output paper bin should be used as default.
The default selection is
Bin 1
.
Default input bin
This selection defines which input paper bin should be used as default.
The default selection is
Bin 1
.
IPDS bin 1-5
The physical paper size selection must match the actual paper size you are
using for Bin 1-5. The predefined sizes are
Statement
,
Ledger
,
Folio
,
Hagaki
,
Executive, Letter
,
Legal
,
A4
and
A3
. The default size is A4.
If you are using another paper format, select
Custom
. This selection
requires that you define the paper size by setting the parameters
Physical
Paper Width
and
Physical Paper Length
to the appropriate values.
IPDS PostScript
Configuration
Click the
IPDS PostScript Driver Settings
tab and enter the configuration
settings for the parameters as described below. When you are finished,
click
OK
at the bottom of the page to save your settings to the print sever.
Loaded Font
Smoothing
A downloaded 240 dpi font may appear jagged when printed on a 300 dpi
printer. The Axis Network Print Server uses a font smoothing feature to
enhance the appearance of these fonts. The font smoothing may be
disabled if you want to speed up the font loading or if your printer has
insufficient PostScript virtual memory.
Loaded font smoothing is
Enabled
by default.
Note:
PostScript Error
Handler
Use this parameter to download a PostScript Error Handler to the printer
at power on. Once downloaded, the Error Handler will print an error
message if a PostScript error occurs. The Error Handler is
Disabled
by
default.
Some printers will internally turn the sheet upside down when duplex is used. This may cause
undesired effects when using pre-printed forms. Setting this parameter to
No
will force the
entire job to be printed in duplex mode
Font smoothing is optimized for printers with 300 dpi resolution. If your printer has a
resolution of 600 dpi or higher, the smoothing effect will be less significant. In these cases we
recommend that you disable the font smoothing to avoid reduction in the performance.
