Upgrading the Firmware
170
AXIS 5570e User’s Manual
7. If you do not have a default password, just click
Next >
. If some of your
servers use a different User ID or Password than the default entries, they will
be displayed in the
Remaining servers
list. Enter the User ID and Password
for each individual server. Click
Next >
.
8. Name the upgrade job. This is optional, so you can leave the field blank if
you want. Click the
Start
button to start the upgrading job.
9. You can view the progress of the job in the Event Log.
Refer to
“Using AXIS ThinWizard for Print Server Management”
on page
132 for more information about AXIS ThinWizard.
Upgrading using FTP
To upgrade over the network using FTP you will need a file with the new
print server firmware. The name of this file is in the form
product_version.bin
.
Ensure that
FTP Enabled
is set to
yes
. To check this parameter, browse to
the print server and select
Admin | Network Settings | Detailed View |
TCP/IP Network
.
Caution!
The objective of this example is to upgrade a print server to firmware
version 7.10.
The description below from a typical Windows session uses the following
examples
:
• Print server model: AXIS 5570e
• IP address of print server: 10.13.4.105
• New firmware version name: 5570e_7_10.bin
• Location of firmware and upgrade procedure: c:\Axis
Be careful not to interrupt the file transfer. If the transfer is interrupted, the print server may
have to be re-initialized by your dealer.
