SNA Parameter Overview
174
AXIS 5570e User’s Manual
Updating parameters
This is most easily done from the internal Web pages of your Axis
Network Print Server. To set the parameters using a Web browser, you
first need to assign an IP address to the Axis Network Print Server. For
instructions on how to do this, refer to
“Setting the IP Address”
on page
15.
Alternatively, you can update the parameters via FTP, TFTP or by using
extended IBM printer emulation.
Using extended IBM printer emulation means setting up the Axis Network
Print Server by printing a file containing extended IBM emulation
commands to it after you have established communication with your IBM
host. The configuration is started by inserting the sequence
%
in
your text.
To protect your settings, a password must be provided. By
default, the password is
pass
.
You may then set the parameter values
directly using the syntax shown below:
Syntax:
When all parameters have been set the
SAVE
command saves the settings
permanently. The
%CONFIG-
command resumes normal printing. In order
to maintain backward compatibility, some parameters must be preceded
by a
%+
command. See also
The Parameter List
, on page 216.
To set the parameters to their default values, enter the following in your
document and print it.
Description - Axxxxxxx, where "xxxxxxx" is the last 7 characters of the Axis Network Print Server
serial number, in reverse order, e.g.
if s.no. =
00 40 8C 1B 06 D4 the default LU Name =
A4D60B1C.
This will be the name of the APPC device and controller
created during auto-configuration
CP_NAME
(AXIS 570 only)
Control Point Name
Axxxxxxx
5494 only
Description - Axxxxxxx, where "xxxxxxx" is the last seven characters of the Print Server serial
number, in reverse order, i.e. a print server with serial number 00 40 8C 1B 06 D4 will have the
default CP Name A4D60B1C. This will be the name of the APPC controller created during auto-
configuration.
H1_NW_NAME
Host Network Name
APPN
5494 only.
H1_LU_NAME
Host LU Name
DEFAULT
5494 only
Parameter
Name
Default
Emulation
<Parameter name> = <value> [, <value>];
