Configuration Possibilities
154
AXIS 5570e User’s Manual
Example:
In order to direct print jobs to the printer connected to the AXIS 5570e,
you should assign the host to a separate logical printer, and install a
character set conversion filter.
Follow the instructions below to change the conversion filter (USB1 is
used as an examlpe here):
1. From the print server’s internal Web page, select
Admin | Logical
Printers.
2. Select the
PR1
tab.
3. Set the parameter
Physical Port
to
USB1
.
4. Set the parameter
Character Set Conversion
to
ISO>IBM
.
5. Click the
OK
button.
6. Select the
PR2
tab.
7. Set the parameter
Physical Port
to
USB1
.
8. Set the parameter
Character Set Conversion
to
DEC>IBM
.
9. Click the
OK
button.
The ISO 8859-2 printer data that is sent to logical printer PR1 converts to
IBM PC Set 2 and is printed on USB1. Similarly, the DEC printer data that
is sent to logical printer PR2 converts to IBM PC Set 2 and is printed on
USB1.
Adding Strings Before
and After Print Jobs
These string functions provide a way to send printer control commands
before and after each print job. They may be specified individually for
each logical printer.
All strings are entered as hexadecimal byte values.
Example:
Follow the instructions below to add a string after the print job:
1. From the print server’s internal Web page, select
Admin | Logical
Printers.
2. Select the
PR5
tab.
3. Enter the string
04
in the
String After Print Job
text field.
4. Click the
OK
button.
Your network contains a host using the character set ISO 8859-2 and a host using the
character set DEC.
Assume that the logical printer PR5 is configured as a PostScript printer and that you want to
append the PostScript End of File character (hex
04
) after each print job.
