K-Series Loom User Manual
Loom Assembly
Install The Shelf
Page | 65
Figure 68 - Separation Beam
I
NSTALL
T
HE
S
HELF
1)
Orient the shelf so that the felt strips on the bottom will lay atop
the three sets of Harness Pulleys when the shelf is in place. These
act as Cable Retainers and will keep your Harness Cables properly
located during lifting of the harnesses.
2)
Slide the shelf into the grooves in the Harness Pulley Supports.
3)
Insert the retention pin into its hole. It will, and should be, tight. It
will loosen over time.
Figure 69 – Shelf in place on loom
4)
If you cannot push the pin all the way into the shelf, check that you
haven’t put the shelf in backwards.
C
ONNECTING
T
HE
C
OMPU
-D
OBBY
The Compu-Dobby on this loom looks rather different from its predecessors,
however it works similarly. Many of the differences are related to the new
functions it controls.
1)
Unscrew the thumbscrews on the Compu-Dobby cover.
