K-Series Loom User Manual
Loom Assembly
Inserting Nuts And Bolts
Page | 17
I
NSERTING
N
UTS
A
ND
B
OLTS
NOTE:
Given the limited space provided by the nut access holes, it can be
challenging at first getting the nuts onto the bolt ends. You’ll find it helpful to
push each bolt in just until it just appears in the access hole. Move the nut
into position over the end of the bolt and hold it with your finger. Slowly turn
the bolt clockwise and when the nut engages, tighten it most of the way
down.
If your fingers are too big to comfortably manipulate the nut, try holding it
with a flat blade screwdriver or needle-nose pliers.
Figure 7 - Inserting Nuts
Note:
As you are building the loom, do not tighten the nuts all the way down. You
will tighten everything down once you have squared and leveled the loom as
described on page 29.
