K-Series Loom User Manual
Additional Loom Information
Loom Maintenance
Page | 127
1)
Using AVL Drive, push the button to free your warp beam. This will
put the screw at the top-most position.
2)
Put a small glob of the clear synthetic grease on the screw where
there has been grease on the screw before.
Note:
You will see a color change between the gray screw and the section that has
been blackened with grease.
3)
In AVL Drive, push the button to lock the warp beam. This will
move the screw to the bottom-most position, spreading the grease
as it moves.
