Additional Loom Information
K-Series Loom User Manual
Page | 128
Loom Maintenance
Pulleys
The pulleys on your loom should not need lubrication. However, if any of the
pulleys are squeaky, spray them with dry film lubrication or silicon spray.
Shuttles and Shuttle Race
If you notice any trouble with the movement of your shuttles, use paste wax
on your shuttles and shuttle race.
Checking Cables
The cables on your loom will wear out eventually due to the friction of the
moving parts. Check all cables for wear and replace as needed.
Brake Cable
Note:
The K-series loom is designed so that you do not need to unhook the brake
cable in order to warp the loom.
If you remove the Brake Cable, please be sure, when you reinstall it, that
the looped end is secured to the “J” bolt, that the cable is drawn
immediately up from this bolt and around the back of the drum (x3), and
that it then routes down the front of the drum where it connects to the
spring at the pedal. Be sure the cable does not cross over itself at any time.
Tool Kit And Spare Parts
Here’s a list of the basics, nice-to-have-around items:
1)
Minimum Tools
[ ]
Socket Wrench with
[ ]
7/16”, 1/2” sockets
[ ]
Crescent Wrench
[ ]
Large Standard Blade Screwdriver
[ ]
Small Standard Blade Screwdriver
[ ]
Phillips Screwdriver
[ ]
1/8” Allen Wrench
