Weaving Instructions
K-Series Loom User Manual
Page | 98
Warping The Sectional Beam
To keep the warp from slipping forward during the threading process,
retighten the tension rope around the pulley and tension drum and clip the
rope end to the spring.
Use of Warping Wheel
The Setup
1)
Adjust height so position of mini-raddle is just below eye level.
2)
Adjust the wind-off tension with toggle and cord. Tie cord to
prevent slipping.
Figure 92 - Adjust Wind-off Tension
3)
Adjust Warp Length using different spool placement by moving the
spools on the arms.
4)
Reset the Revolution Counter to Zero
5)
Setup Cones with the Cone Caddy
Making the First Section
6)
Open and secure the raddle top using the removable pin.
