Weaving Instructions
K-Series Loom User Manual
Page | 82
Warping Direction
The K-series loom can have two warp beams. The warp comes off the top of
the top warp beam, and from under the bottom warp beam.
The handle for the top warp beam will be on the left side of the loom (when
you are in weaving position). It will be moved clock-wise when warping. The
handle for the bottom warp beam will be on the right side of the loom. It will
also be moved clock-wise when warping.
For both beams when weaving, the warp will come off the beam, up and
over the separation beam, and into the heddles.
Figure 84 – Warped beam from back
