Weaving Instructions
K-Series Loom User Manual
Page | 100
Warping The Sectional Beam
9)
After you have wound one length bring the thread(s) around the
back of the raddle and through a dent (working from right to left).
Figure 95 - Bring Thread Through Raddle
10)
Bring thread(s) down over the end you just wound and secure in
the silver clip (swooping under from left to right).
Tying Off
11)
Put the raddle top back on. Cut the bout threads just to the left of
the clip and under the threads going over the wheel.
12)
Hold onto the threads securely at the raddle (so they don’t slip
through. Below, wrap the cut threads around the clip.
Figure 96 - Hold Threads at Raddle
