Loom Assembly
Page | 32
Install
1)
2)
Note:
It is easier to
moving forward
on the harness
3)
Note:
Check that the cable is not twisted on itself
you are weaving.
Loom Assembly
32
Install the Harness
If needed, remove the shelf as described earlier.
The harness cables are
together.
plastic bags and the twist
easier to hang the harnesses beginning at the back of the loom and
moving forward
on the harness
Take both
over the
pulley furthest
Check that the cable is not twisted on itself
you are weaving.
he Harness Frames
If needed, remove the shelf as described earlier.
The harness cables are
together. There is a set at the top
plastic bags and the twist
hang the harnesses beginning at the back of the loom and
moving forward. Each harness cable has two loops that fa
on the harness frame.
both ends of
over the middle pulley.
pulley furthest from the Dobby
Figure 25
Check that the cable is not twisted on itself
you are weaving.
Frames
If needed, remove the shelf as described earlier.
The harness cables are attached to t
There is a set at the top
plastic bags and the twist ties.
hang the harnesses beginning at the back of the loom and
Each harness cable has two loops that fa
of one of the
pulley. Place the long
from the Dobby
25 - Placing top har
Check that the cable is not twisted on itself
If needed, remove the shelf as described earlier.
attached to t
There is a set at the top and at the bottom.
ties.
hang the harnesses beginning at the back of the loom and
Each harness cable has two loops that fa
one of the top cable
Place the long
from the Dobby.
Placing top har
Check that the cable is not twisted on itself —
If needed, remove the shelf as described earlier.
attached to the dobby and
and at the bottom.
hang the harnesses beginning at the back of the loom and
Each harness cable has two loops that fa
cables. Place
Place the long end of the cable over the
Placing top harness cables
— this will cause problems when
K-Series Loom User Manual
Install Harness Assemblies
If needed, remove the shelf as described earlier.
he dobby and bundled
and at the bottom. Remove the
hang the harnesses beginning at the back of the loom and
Each harness cable has two loops that fasten to the hooks
s. Place the shorter
end of the cable over the
ness cables
this will cause problems when
Series Loom User Manual
Install Harness Assemblies
bundled
Remove the
hang the harnesses beginning at the back of the loom and
sten to the hooks
the shorter piece
end of the cable over the
this will cause problems when
Series Loom User Manual
Install Harness Assemblies
Remove the
sten to the hooks
this will cause problems when
