11
Step 3. Align both sides of the card to the rails, and slide all the way into the chassis.
Figure 2-3
Align the New Card to the Rail on Both Sides
Step 4. Secure the screws on both sides to fix the new card to the chassis.
Figure 2-4
Secure the Screws on Both Sides
2.2 Removing a Previously Installed Card
Step 1. Use a flat screwdriver to unscrew the left and right puller screws on the control board module.
Figure 2-5
Remove the Left and Right Puller Screws on Control Board
Step 2. Use the just removed puller screws and screw them to both sides of the card to be removed.
Figure 2-6
Screw the Left and Right Puller Screws to Old Card
