Avitech Rainier 3G Plus User Manual Download Page 131

Page: 131 / 147

125

Appendix C Setting Up the Alarm Sound

An audible alarm sound (

“WAV” file format only) can be played during an alarm (no video / video black /

video freeze) / (no audio) in each image source window to allow for easy monitoring. This appendix lists
the steps to setup playback of alarm sound.

C.1 Alarm Sound Setup for No Video / Video Black / Video Freeze Occurrence

Step 1. Select

“On” in “Alarm”



”Enable” (located in the “Properties” portion of the Phoenix-Q software)

to enable the various alarm features.

Step 2. Select

“On” in “Video Alarm”



”Enable” to enable the various video signal alarm feature.

Step 3. Select

“On” in “Video Black”



”Enable” to enable the “video black” alarm feature.

Analog input signal is not supported.

Summary of Contents for Rainier 3G Plus




















































































































































Search results

Summary of Contents for Rainier 3G Plus

Reviews:

Related manuals for Rainier 3G Plus

Brands by name

Popular brands

Avitech Rainier 3G Plus, User Manual

Search results

Summary of Contents for Rainier 3G Plus

Reviews:

Related manuals for Rainier 3G Plus

Brands by name

Popular brands