96
Image
Width
(2/4/6)
Set the width of the image border.
Default Type
Set Other Type:
Select the type of 3D border for the image.
Color
Change image border color as each pixel/line can have a different color.
(
Line 1
/
2
/
3
/
4
/
5
/
6
)
Video Border
Enable
(On / Off)
Display the border of video.
Width
(1 to 6)
Set width of the video border.
Color
Change the video border color.
Image Adjustment
Brightness
(
–128 to 127)
Adjust the brightness or darkness of the input signal. This control can
correct exposure problems caused by overexposure (too much light) or
underexposure (too little light).
Saturation
(0 to 1023)
Adjust the color saturation of the input signal. For example, by moving the
slider to the right, increase the vibrancy of a blue sky in an image. By
moving the slider to the left, reduce the vividness of color. Create a
black-and-white image effect by moving the slider all the way to the left, so
that all color in the image is removed.
Contrast
(0 to 1023)
Adjust the difference in tone between the dark and light areas of the input
signal. Moving the slider to the right increases the contrast, making the
light areas lighter and the dark areas darker. For example, if the image
has a dull, gray tone, sharpen the detail by increasing the contrast.
Hue
(
–1024 to 1023)
Adjust the intensity of color of the input signal.
Sharpness
(
–128 to 127)
Adjust the sharpness to increase contrast, enhance image edges, or
reduce shading of the input signal.
Alarm
Enable
(On / Off)
Activate the various video and audio alarm features.
Video Alarm
Enable
(On / Off)
Activate the various video signal alarm features.
Video Black
Enable
(On / Off)
Enable the “video black” alarm feature which blacks out the screen when
the image’s brightness level decreases.
Note: Analog input signal is not supported.
