Avitech Rainier 3G Plus User Manual Download Page 135

Page: 135 / 147

129

Step 5. Select

“On” in “Alarm Sound”



”Audio”



”Enable” to enable playback of alarm sound when

no audio is detected in a particular image source window.

Step 6.

Set the “audio alarm” sound playback duration (second) for particular image source window.

Step 7. Click

“Change” in “File” to choose another alarm sound to play when audio alarm occurs for the

particular source image window.

Click the

“browse” button to select the location of the audio file. Click “Play” to hear a sampling of

the alarm sound selected. Then click

“OK” to exit.

At present, only the

“WAV” audio file format is supported.

Step 8. Select

“On” in “Meter”



”Meter Enable” to turn on audio meter monitoring.

Summary of Contents for Rainier 3G Plus




















































































































































Search results

Summary of Contents for Rainier 3G Plus

Reviews:

Related manuals for Rainier 3G Plus

Brands by name

Popular brands

Avitech Rainier 3G Plus, User Manual

Search results

Summary of Contents for Rainier 3G Plus

Reviews:

Related manuals for Rainier 3G Plus

Brands by name

Popular brands