122
Sample illustration 2
Figure B-2
Audio Output From Card ID 3 Image 2 Plus Headset
To allow audio output from the chassis
’ headset port and from card ID 3 image 2 embedded audio –
Headphone Parameters
Mute
Off
(chassis level so this includes all 4 cards)
Headphone (Local)
Enable
On
(card level so this must be set for card ID 3; take note that only
1 card can be enabled at a time, turning on card ID 3
’s local headphone will cause the other card’s
local headphone to be turned off automatically)
Headphone (Local)
Source
(card level; select from among the 4 image
’s audio signal)
Headphone (Local)
Channel
Group 1 CH1/CH2
(this is the default setting; card level;
depending on the signal source select another group to monitor if available)
Embedded Audio
Source
(card level; card ID 1 and card ID 2 and card ID 4 select
“Pass through
embedded audio
”; card ID 3 select “Image 2 embedded audio”)
