82
6.1 Rainier 3G Plus
– 1 / – Q Properties Setup
Connection
Properties
Change . . .
Click
Change
to set the network
Connection Properties
by entering the
IP address
,
Subnet mask
, and
Gateway
. Or, set the
Baud rate
when
using the
Serial Port
to connect.
Note: This item is available for slave (cascaded) chassis only.
Serial Port
–
TSL V3.1
On
Off
Enable/Disable
TSL V3.1
for the configuration of the
RS-232
port with a
TSL connection.
Note: The
RS-232
port is
not
for connecting to a computer for
configuration (Phoenix-Q utility). Likewise, it
cannot
be used for entering
any Avitech ASCII commands.
When configuring, connect the (
Master
Rainier 3G Plus) to the controlling
computer through an
Ethernet
connection and then connect the (
Master
Rainier 3G Plus)
RS-232
port to the
TSL router
.
Note: T
o implement TSL, aside from selecting “On” for “Serial Port-TSL
V3.1,”
“TSL UMD Properties” must be “On” and “Display Address / Option”
must be configured.
“Label
Display Type
” for the particular Window must be set as
“UMD” or “D-Name/UMD”
