37
After dragging/assigning the card, it will be displayed as belonging to the assigned group.
Figure 4-9
Phoenix-Q Software: Idle Device Assigned to Group 001
Step 6. Repeat the previous step for any additional
Idle Device
(s). Next, click
OK
to exit the
Group
Setup
window. Phoenix-
Q will save the configuration file “System.agi” to the device’s flash
memory.
Figure 4-10
Phoenix-Q Software: Update Configuration Progress
After group setup has been completed, every time the IP address of the master chassis has been changed
(see Appendix D), perform the simple step of entering Group Setup window and then clicking “OK” to exit
(there is no need to re-assign grouping). This will help maintain system integrity when running ASCII X
command.
