3 Connecting Peripheral Instruments
Reflex HC Series
68
(10) Select the serial port corresponding to the RS-232C port
of your personal computer. (Serial port: any one of
COM1 to 4. Normally, COM1)
(11) Select a "Baud rate" of 300.
(12) Click
"OK."
(13) Click
"Apply."
(14) Click "Start", point to "Shut Down" then click "Restart the
computer?".
(15) After Windows* has completely started, turn on the
power supply to the balance.
(16) It is not necessary to perform the Windows* control
panel setting operation every time.
Checking Operations
(1)
Open the "Note pad" attached to Windows* (or the
application in use).
(2) Press
the key on the balance.
(3)
Verify that the numeric value displayed on the balance
is displayed on the screen of personal computer.
(4)
End the operation using the standard ending procedure.
Windows* = Windows 95, Windows 98, Windows Me,
Windows 2000
Activate Windows
To ensure correct operation, activate Windows* using the
following procedure.
Procedure
(1)
Disconnect the balance power supply.
(2)
Activate Windows* and wait until activation is complete.
(3)
Plug the AC adapter into the outlet and turn ON the
balance.
