2 Menu Item Selection
Reflex HC Series
46
(2) Press
the key.
The
symbol disappears and peak value
detection starts.
(3)
and * are simultaneously displayed after the peak
value is detected, and the data is output. This display
will not change regardless of the load on the pan.
(4) Press
the key.
The balance returns to the peak detection standby state
in step 1).
Note:
Press the
key in the peak detection standby state
to initiate the power standby state.
Press the
key during detection of the peak to return to
the peak detection standby state.
Polarity of the peak value displayed is "polarity of the
displayed value of the first change by five times or more of
Zero Range from the display within Zero Range."
Usually the peak value is easily measured by setting to
[23]. Depending on the weighting conditions and
the sample type, this setting may not always be successful.
2.8.6 Interval
Timer
Automatically outputs the displayed value at preset intervals.
The symbol is illuminated when the Interval Timer is
activated.
(1)
Using Menu Map item [50], set the output interval (00:01
= 1 sec to 99:59 = 99 minutes 59 seconds).
(2)
In the interval timer standby state when the and
symbols are both illuminated, press the
key.
The first data is output. Data is automatically output at
the set time intervals.
(3)
To stop output, press the
key.
The balance returns to the interval timer standby state in
step 1).
