3 Connecting Peripheral Instruments
Reflex HC Series
63
... After receiving this command, the balance outputs
ABCDEFG12345<CR>. The printer can print this
character string.
Note:
Only capital alphabets and a part of symbols
(decimal point, symbol etc.) can be used when printing
with an electronic printer. A maximum of 15 characters
per line.
(4)
Command codes for
and
(i) Commands related to output
D01
Continuous output
D03
Continuous output with stability information
D05
Single output
D06
Auto Print setting (type of Auto Print is set
separately)
D07
Single output with stability information
D09
Release of continuous output and Auto Print
(ii) Commands related to operation keys
POWER
Equivalent to the
key
Q
Equivalent to the
key
MENU
Equivalent to the
key
TARE
Equivalent to the
key
T
Equivalent to the
key
RANGE
Equivalent to the
key
B
Equivalent to the
key
UNIT
Equivalent to the
key
Equivalent to the
key
POWER+
Equivalent to holding the
key for
approximately 3 seconds.
MENU+
Equivalent to holding the
key for
approximately 3 seconds.
UNIT+
Equivalent to holding the
key for
approximately 3 seconds.
PRINT+
Equivalent to holding the
key for
approximately 3 seconds
.
(iii) Commands related to Application Measurement
