2 Menu Item Selection
Reflex HC Series
50
Solid specific gravity unit (
•
d): Density of the liquid in which the
sample is immersed.
Liquid specific gravity unit (d): Volume of the reference weight
to be immersed in the sample.
unit (
Numeric value (multiplier)
multiplied by the gram (g) weight of the unit.
To register Functional Units, set the constant to something
other than 0. Setting the constant to 0 turns the function off.
For the unit names, refer to
Section 2.3 "Menu Map."
2.9.2 %
Conversion
(1)
Set the % unit with Menu Map item [56].
The % unit is set before shipment.
(2) Press
the key several times in the mass display
until the % unit is displayed.
Setting the 100% reference
Press the
key to tare the balance.
Load the reference sample that corresponds to the
100%value. This value must be equivalent to 100 counts or
more in the "kg" unit.
When the stability symbol illuminates, press the
key.
is displayed briefly and the reference sample weight is
displayed as 100%.
Note:
The numbers of digits displayed in the % unit and
rounding off of the minimum digit vary depending on the mass
value of the reference sample and the balance model. It is not
possible to obtain resolution greater than that in the “g” unit.
The weight of subsequent samples are displayed as a
percentage of the reference sample weight.
2.9.3 Piece
Counting
(1)
Register the PCS unit with Menu Map item [57].
(The PCS unit is registered before shipment.)
