2 Menu Item Selection
Reflex HC Series
49
automatically canceled and zeroing occurs. If zeroing
does not occur, increase the value of the Zero Range.
Notes:
y
Standby state is not available in the Animal Weighing
mode.
y
Press
the key to initiate the power supply standby
state.
y
On the premise of weighing animated objects, the
stability detection band is automatically extended in the
Animal Weighing mode. Reproducibility of the
measurement data is slightly less than with other
modes.
y
When the animal being weighed cannot be controlled
and Auto Print will not activate, press the
key to
output the displayed value. Then unload the animal.
Even if the stability symbol lights before the animal is
removed, data is not printed again.
y
By setting a larger stability detection band in the menu,
the stability symbol will light more readily.
y
If the balance is slow to return to the zero point set a
larger Zero Range value.
2.9 Unit
Registration
Menu and Unit Change
•
2.9.1
Unit Registration Menu
Press the
key in mass display to sequentially change the
registered units. It is possible to display units other than "kg"
with the Reflex HC series of balances. Before weighing, set
the display units to be used with the unit setting menu [54] to
[62]. (Unit kg, %, number (PCS) were set before shipment.)
Note:
y
In the unit setting menu, the stability symbol is
illuminated to indicate the currently set units.
y
Set or release the unit by pressing the
key
when the unit is displayed.
Functional Units:
