1 Basic Operation
Reflex HC Series
12
operation and
standby
modes.
Measurement
function.
menu.
Enters span
calibration or
menu
selection.
(*2)
Displays the
last Menu Map
item that was
set.
(Last menu
recall)
Moves to the
next Menu
Map item.
Displays the
last Menu
Map item that
was set.
(Last menu
recall)
Tares the
balance.
(Displays
zero.)
(*3)
Displays the
Pretare value.
Selects and
sets the
currently
displayed
Menu Map
item.
No operation.
Changes the
selected unit.
(*4)
Switches
between the 1d
and 10d
display.
(*5)
Increases the
numeric value
of the flashing
digit by 1.
No operation.
Sends the
displayed
value to a
peripheral
device.
Sends the date
and time to a
peripheral
device.
Moves to the
next digit
during
numeric value
entry.
No operation.
*1
Refer to Section 2. “MENU SELECTION.”
*2
This key is used to set values when percent (%), number
(PCS), solid specific gravity ( d), or liquid specific gravity (d)
units are displayed.
*3
When a Pretare value is set, zero is not displayed and the [-
Pretare value] is displayed.
*4
Units other than “kg” must be registered and set before they
can be used for measurement. Kilogram (kg) is the only unit
registered before shipment. To register other units, refer to
Section 2.10. “REGISTRATION, RELEASE, AND SELECTION
OF MEASUREMENT UNITS”.
*5
When the unit is set to 10d, the resolution of the minimum
display is decreased by one decimal place.
