2 Menu Item Selection
Reflex HC Series
42
2.7.7 Taring/Printing
Determine if the balance should wait for stability before
printing when the
key is pressed or displaying the zero
point when the
key is pressed.
When the Application Measurement function is selected, the
key does not wait for stability.
Menu Map item [39]
Print and tare operate without waiting for stabilization.
Menu Map item [40]
Print and tare operate after the stability symbol illuminates.
Note:
When the balance is in the
mode and
waiting for stability to be determined, ---- is displayed when the
key is pressed.
Press the
key to disable this function. Taring is not
executed after the
key is pressed.
Once the
key is pressed, data is not output until the
and symbol has illuminated and the balance is stable. Data is
output only after the stability symbol is lit.
2.8
Application Menu
:
2.8.1 Overview
The Application Measurement function is the generic name of
the functions used to perform measurement work using the
balance in more efficient ways. Only one Application
Measurement function can be used at a time. When the power
is turned ON, the balance will begin in the function mode that
was last set.
Cancellation of Application Measurement
To cancel the Application Measurement, press the
key
while in the mass display and hold it until
is
displayed.
