2 Menu Item Selection
Reflex HC Series
32
•
Press
the
key to set the decimal point
position.
•
is displayed briefly to indicate that the setting is
completed.
2.4.3 Menu
Lock
The Reflex HC series of balances have a "Menu Lock"
function that locks the menu selections to avoid changes being
made by mistake.
The menu lock is toggled ON and OFF by pressing the
•
key during
display that appears after power is supplied
to the balance.
is displayed when the menu is locked.
is displayed when the menu lock is turned off.
Menu lock is on.
Menu lock is off.
Note:
Access is denied and
is displayed when the
user attempts to select a locked menu.
Use the following procedure to turn off the menu lock function
and restore access to the menus.
(1)
Disconnect power from the balance and wait 10
seconds. Reconnect power to the balance.
(2) When is displayed, press the
key.
(3)
is displayed to indicate that the menu lock
has been turned off.
2.4.4
Last Menu Recall
This function is convenient when an application requires
frequent changes to a specific Menu Map item.
During mass display or menu selection, press and hold the
key for approximately three seconds. The last Menu Map
item that was changed or set is displayed.
