2 Menu Item Selection
Reflex HC Series
37
is 0.01g, 150g must be set by inputting “15000” in the
display.
y
Numeric values are memorized independently for each
graphic display mode.
y
The graphic display mode can be selected without
setting numeric values.
2.6.2
Full Scale Mode
The relative amount of the load on the pan is displayed in the
bar graph. This feature helps to prevent errors due to OL
(overload) status.
Use Menu Map item [11] to select the Full Scale mode.
A bar displayed in the lower areas of the scale indicates that
the load on the pan is small.
A bar displayed in the upper areas of the scale indicates that
the load on the pan is close to the weighing capacity.
2.6.3 Target
Mode
Target mode is useful for filling applications or for quality check
by weight.
The
value is the numeric value that is the desired
amount in the unit that is used for weighing. The
value is the numeric amount above or below the target value
that is acceptable.
This mode is useful for constant amount weighing of liquid or
judgment of excess and shortage.
Menu Map item [12] selects the Target mode.
Menu Map item [13] sets the
value, which
corresponds to the center line of the
graphic display.
Menu Map item [14] sets the
value, which
corresponds to the distance between
the center line and upper or lower
t
riangles.
2.6.4 Group
Mode
This is the best mode to determine pass or failure judgment
based on the sample weight.
