3 Connecting Peripheral Instruments
Reflex HC Series
67
3.2.4
Windows Direct Function
Note:
For Windows95 Version 4.00.950B, see page 69
“Compatibility Notification Regarding Linking of “Windows
Direct” Function with Windows95 Version 4.00.950B.”
The Reflex HC series balance can transfer data directly to a
personal computer running Lotus 1-2-3, Excel, or other
applications of Windows*.
Preparation (Installation)
Install according to the procedure described below.
(1)
Turn on power to the balance and set the condition for
communication as follows:
Menu
[74]
[77]
[81]
[89]
[92]
Menu
[97]
[98]
(2)
Keep pressing the
key and complete selection of
the balance menu.
(3)
Disconnect the power to the personal computer and
balance.
(4)
Connect the personal computer to the balance with the
RS-232C cable.
(5)
Turn ON the power to the personal computer only and
start Windows*.
(6)
Click "Start", choose "Settings" and "Control Panel" then
select "Accessibility Options."
(7)
Confirm that there are no check marks for any items on
tabs including "General."
(8)
Put a check mark at "Support Serialkey device" in the
"General" tag. This is the only check mark on all the
tabs.
(9) Open
"Settings."
