1 Basic Operation
Reflex HC Series
16
(1)
Cut the supplied tape (2) and stick it onto the 4 points
on the case (3) (refer to the diagram below).
(2)
Fix the vinyl cover (1) onto the double-sided tape (2),
ensuring that there are no creases.
(3)
Fit the pan.
(4)
Place a weight onto the pan which is close to the
weighing capacity to check that the pan and vinyl cover
are not touching. Accurate measurements cannot be
made if there is contact between the two items. If this is
the case, re-fit the vinyl cover.
Note:
The vinyl cover (1) is folded up when it is in the packaging.
1.3
Turning the Power ON
(1)
Insert the plug of the AC adapter into the DC IN
connector on the rear of the balance, then insert the AC
adapter into the power source.
(2)
The balance self-check is activated and the following
messages are displayed in the order indicated.
Ver. No.
••
•
•
•
•
••
•
•
•
•
Whole lighting
(3) Press
the
key. The whole display illuminates and
then the display changes to indicate the kilogram-
display.
