2 Menu Item Selection
Reflex HC Series
43
To use the Application Measurement function that was just
canceled, use the last menu recall function by pressing and
holding the
key for 3 seconds in the mass display.
Using the Application Measurement Function with a
Unit Other Than "kg"
Select the Application Measurement function while in the mass
display, and select the unit of weighing with the
key.
Because the operation of the
differs from the one in
normal mass display, the Application Measurement function
cannot be selected while %, PCS, or specific gravity units are
displayed.
2.8.2 Zero
Range
The "Zero Range" value is used in the Application
Measurement function as a reference to identify whether the
sample is loaded.
For example, if the display is within the Zero Range, the
balance determines that a sample is not loaded. If the display
is more than five times the Zero Range it determines that a
sample is loaded. Application Measurement functions which
involves judgment of whether a sample is loaded or not work
in accordance with the Zero Range setting.
In Menu Map item [48], the "Zero Range" value is set using
the number of counts displayed in kilogram-display.
The setting range is 01 to 99 with 01 being the default value.
Even when weighing will be done in another unit, Zero Range
setting is made by only gram value.
Note:
When a Pretare value is set, the value to determine that
there is "no load" becomes
"- Pretare ± Zero Range" during mass display. For example,
the Zero Range function works as expected when attempting
to weigh and Auto Print the mass of a bottled sample during
mass display.
2.8.3 Auto
Zero
Select Menu Map item [41].
