03/10 Rev. 5.05-00
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
38
INTERFACE PARA
Interface parameter
> EASYPLUGINTERPR
Interface
AP 5.4
AP 5.6
Interface type
This parameter sets the interface, by which the printer will receive data.
Serial Com1
Serial interface Com1.
P
Selection of the type of serial interface is done with parameter
INTERF. PARAM >
EASYPLUGINTERPR > Serial Port Mode
.
Only for Ethernet interface (10/100 Base T):
TCP/IP Socket
Print data can be sent to the printer via a TCP/IP socket
LPD Server
Print data can be sent to the printer via the LPR/LPD-protocol
USB
USB 1.1 interface
Serial Com3
Serial interface Com
3
.
¯
Only with optional I/O board mounted.
Automatic
All interfaces are enabled to receive data, but
not simultaneously
.
¯
Don´t send data to more than one interface at a time.
¯
Except are interfaces, which are being used by an option (e.g. OLV).
Spooler mode
AP 5.4
AP 5.6
The operating mode of the spooler determines whether print series are proc-
essed individually, or whether the spooler can receive print data when print-
ing several series.
Single print job
Single print series mode (the interface can only receive data after printing the
required number of labels of a single series)
Mult. print jobs
Multiple print series mode (the interface can receive data while the series is
being printed)
