![background image](http://html1.mh-extra.com/html/avery-dennison/ap5-6/ap5-6_user-and-service-manual_3030321033.webp)
03/10 Rev. 5.05-00
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
33
Cut mode
AP 5.4
AP 5.6
¯
Only with mounted and activated cutter (
SYSTEM PARAMETERS >
Periph. device
= „Cutter“).
This is where the procedure for the label output and cut is defined.
Real 1:1 mode
The whole surface of the label is printable. The label is pushed forward to the
cutter for cutting. After the cut, the beginning of the next label is drawn back
under the print head. This reduces the output volume (in relation to a certain
time).
[12] Printing process (schematic) in „Real 1:1 Mode“.
Avery
Avery
Avery
Avery
Printhead
Cutter
1. Printing
2. Printing finished
3. Feeding
4. Cut and
feed back