03/10 Rev. 5.05-00
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
36
Rewind direction
AP 5.4
AP 5.6
¯
Only with mounted and activated rewinder (
SYSTEM PARAMETERS >
Periph. device
= „Rewinder“).
Determines the sense of rotation of the optional Rewinder.
Printing outside
Rewind direction: The printed label is facing outside.
Printing inside
Rewind direction: The printed label is facing inside.
X - Printadjust
AP 5.4
AP 5.6
The zero point of the mask is moved in relation to the edge of the label on the
X- axis, i. e. lengthways to the material.
¯
If the setting is changed, while the print job is stopped, the printer
recalculates the format using the changed values.
¯
Caution with graphics, which are generated via one of the Easy Plug
commands #YI, #YIR or #YIB! If the graphics is shifted beyond the label
border as a consequence of changing the parameter "X-Printadjust", the part
of the graphics which "juts out" will get lost.
x.x mm
Setting range: -5.0 to +5.0 mm; Unit interval: 0.1mm
Default setting: 0.0 mm
y
Maximum offset away from the edge of the label: +5.0 mm
y
No offset: 0.0mm
y
Maximum offset towards the edge of the label: -5.0 mm
Y – Printadjust
AP 5.4
AP 5.6
The zero point of the mask is moved in relation to the gap position on the
Y-axis, i. e. in the feed direction.
¯
If the setting is changed, while the print job is stopped, the printer
recalculates the format using the changed values.
¯
Caution with graphics, which are generated via one of the Easy Plug
commands #YI, #YIR or #YIB! If the graphics is shifted beyond the label
border as a consequence of changing the parameter "Y-Printadjust", the part
of the graphics which "juts out" will get lost.
x.x mm
Setting range: -5.0 to +5.0 mm; Unit interval: 0.1mm
Default setting: 0.0 mm
y
Maximum offset in feed direction: +5.0 mm
y
No offset: 0.0mm
y
Minimum offset against feed direction: -5.0 mm