![background image](http://html1.mh-extra.com/html/avery-dennison/ap5-6/ap5-6_user-and-service-manual_3030321064.webp)
03/10 Rev. 5.05-00
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
64
¯
CAUTION! - The key code "production" allows the access to parameters,
which are used during production to adjust the printer. Input errors to those
parameters can make the printer inoperable or can damage it. For this
reason, the production code may only be applied by
trained service
technicians
!
¯
Especially service technicians may use the direct access into production
mode, even if the parameter
Access authoriz.
is set to
Deactivated
, what
means that no password will be queried at all. To do so, proceed as follows:
1. Switch printer off.
2. Switch printer on, simultaneously press the Feed+Prog-key until the printer
type is displayed.
After the printer was powered up, the key code will be queried:
3. Enter the production code.
Possible Settings
Deactivated
Password interrogation switched off (default)
Power-up code
Activates the password interrogation directly after switching the printer on.
After the input of a valid key code, the printer switches into offline mode.
Depending on the entered key code, the printer starts in user, supervisor or
production mode.
User
Activates the password interrogation when accessing the parameter menu.
y
The printer is in the offline mode after switch-on
y
Change to the online mode is possible without restriction
y
To reach the parameters-menu, enter a valid key code
y
Valid key codes: all
Supervisor
As setting „User“, with different valid key codes:
y
Valid key codes: Supervisor, Production
User auto start
Printer starts without password interrogation. Only the menus
PRINT INFO
and
SERVICE DATA
are accessible.
Mode
Key code
Impact
User
2x Cut Feed, Online
Access only to the submenus
PRINT INFO
and
SERVICE DATA
Supervisor
2x Online, Feed, Cut, 2x Online
Access to all parameters ex-
cept production parameters
Production
Cut, Online, Feed, Cut, 3x Online
Access to all parameters
[5]
Permissible key codes.