03/10 Rev. 5.05-00
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
55
Sens. punch-LS
AP 5.4
AP 5.6
Sensitivity punch light sensor
Sets the sensitivity of the material photoelectric switch.
xxx%
Setting range: 10 to 100%; Unit interval: 10%
Default setting: 50%
Maximum sensitivity: 100%. for narrow gaps (perforations).
Minimum sensitivity: 1%. for clearly detectable gaps.
¯
Too high a level of sensitivity can lead to gaps being detected which do
not even exist (on proofs, material thickness fluctuations, perforations etc.).
Foil mode
AP 5.4
AP 5.6
Thermo transfer
Thermo transfer printing (Ribbon sensor activated)
Thermal printing
Thermo direct printing (Ribbon sensor deactivated)
Turn-on mode
AP 5.4
AP 5.6
Operating mode of the printer after it has been switched on.
Online
Printer starts in on-line mode.
Offline
Printer starts in off-line mode.
Standalone
Printer starts in standalone mode.
Error reprint
AP 5.4
AP 5.6
If an error occurs while a label is printed, the last printed label will normally
be reprinted. In case of label layouts containing variable data like e.g. count
fields, switching off the reprint function possibly makes sense.
Enabled
Reprint in error cases (default setting)
Disabled
No reprint in error cases.