03/10 Rev. 5.05-00
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
87
EasyPl. file log
Easy-Plug file log
AP 5.4
AP 5.6
¯
Only visible, if a SD-card is inserted.
¯
Activating this parameter may slow down the label rate. Therefore disable
the function after error analysis.
¯
Activating this parameter may cause error messages, which may be
difficult to understand. Therefore disable the function after error analysis. If
an error occurs, disable the function and restart the printer.
Disabled
The file log function is switched off.
All data
All received data, including immediate commands, are written into the log file.
Interpreter data
All data is written into the log file, which the Easy-Plug interpreter reads out
of the reception spooler. Immediate commands are
not
included.
Log files delete
AP 5.4
AP 5.6
¯
Only visible, if a SD-card is inserted.
No
(Default setting) No function.
Yes
Deletes all log files on the inserted SD-card, which fulfil the following con-
ditions:
y
Filename matches the scheme „EPxxxxxx.log“
xxxxx = number from 1 to 999999, preceding digits filled with „0“. Example:
„EP000001.log“.
y
Location: folder \LOGFILES on SD-card
Those conditions are matched by logfiles, which are automatically generated
by
SPECIAL FUNCTION > EasyPl. file log
.
RFID stat. del.
AP 5.4
AP 5.6
Sets all RFID counters to zero.
P
See
PRINT INFO > RFID status
.
