![background image](http://html1.mh-extra.com/html/avery-dennison/ap5-6/ap5-6_user-and-service-manual_3030321089.webp)
03/10 Rev. 5.05-00
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
89
Cutter exchange
AP 5.4
AP 5.6
¯
Parameter only appears in production mode and only with a cutter
mounted and activated.
Increases the counter „Cutter number“ on the info printout „Service Status“
by one.
P
See parameter
Service Status
on page 24.
yes
Increases the counter "Cutter number" by one
no
Doesn´t increase the counter
Serv. data reset
AP 5.4
AP 5.6
¯
Parameter only appears in production mode.
Sets all counters on the info printout „Service Status“ to zero.
P
See parameter
Service Status
on page 24.
EasyPlug monitor
AP 5.4
AP 5.6
¯
Parameter only appears in production mode.
The parameter activates the logging of received Easy Plug data. Data is
transmitted to COM1 or COM2.
¯
Activating this parameter may slow down the label rate. Therefore disable
the function after error analysis.
¯
To keep the influence of the monitoring function on the data rate as low
as possible, the baud rate should be set to 115,000!
Disabled
(Default setting) The monitor function is disabled.
Serial Com1
The Easy-Plug monitor data is transmitted to Com1.
Serial Com2
The Easy-Plug monitor data is transmitted to Com2.