![background image](http://html1.mh-extra.com/html/avery-dennison/ap5-6/ap5-6_user-and-service-manual_3030321029.webp)
03/10 Rev. 5.05-00
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
29
Print direction
AP 5.4
AP 5.6
[9]
Orientation of the printout „Foot first“ (A) or „Head first“ (B).
Foot first
(Default) Orientation of the printout according to [10A].
Head first
Orientation of the printout according to [10B]. Mind the following:
¯
Define the „true“ label length (without gap length) in parameter
PRINT PARAMETERS > Material length
. If the label gap is wider than 5 mm, the
parameter
SYSTEM PARAMETERS > Miss. label tol.
must be set to a value more than
zero.
¯
The distance between material base line and the first printable dot is
1 mm. To keep this distance while printing „head first“, the material width
must be calculated as follows::
, with
b
Mat
: Material width
b
Bp
: Backing paper width
A
B
Printer
Printout
b
Mat
b
Bp
2
mm
–
=