03/10 Rev. 5.05-00
USER- / SERVICE MANUAL
Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6
81
Delimiter Char
AP 5.4
AP 5.6
Used as a parameter place marker in MLI format instructions.
xxH
Default: xx = 2C (0x2C = „Comma“)
Label Top
AP 5.4
AP 5.6
Label top offset (y-offet) in dots. Equals the parameter
PRINT PARAMETERS >
Y-Printadjust
, which will be ignored, when MLI printjobs are printed.
xxx Dots
Setting range: -240 - +240; Default: 0; Step width: 1
Left Position
AP 5.4
AP 5.6
Left position offset (x-offset) in dots. Equals the parameter
PRINT PARAMETERS >
X-Printadjust
, which will be ignored, when MLI printjobs are printed.
xxx Dots
Setting range: -9999 - +9999; Default: 0; Step width: 1
Manual Calibrate
AP 5.4
AP 5.6
For endless material, the label length information is sent in the printjob. For
punched material, the label length has to be detected by activating this func-
tion.
YES
Label length calculation for punched material.
¯
Activate this function, if label material has changed.
¯
Calibration should be done after changing material, when there are no
printjobs loaded in the printer.
¯
Shortcut (in offline mode): press the feed + prog buttons simultaneously
to activate the calibration.
Resolution
AP 5.4
AP 5.6
Print resolution in dpi. A 200 dpi graphic printjob can be printed with a 300 dpi
printhead.
xxx DPI
Setting range: 200/300 dpi; Default: 300 dpi;
