Avery Berkel Xtra Series Operator Instructions Manual Download Page 4 | Manualshive

Page: 4 / 136

background image

About your Machine

1. Using Your Machine

3

1. Using Your Machine

About your Machine

The scale is intended to be custom programmed to suit the circumstances that you will be
using it in and that means that the display on your scale may be different to the examples
shown in these instructions. If you have questions about custom features not covered here ask
your manager or supervisor for further help.

Safety Warnings

Safe Installation

The mains plug must be inserted into a socket outlet with a

protective earth contact

. The

electrical supply at the socket outlet must provide over current protection of an appropriate
rating.

CAUTION: The mains lead must be connected to a supply outlet with a protective earth
contact. The electrical supply at the socket outlet must provide over current protection of an
appropriate rating.

Pluggable equipment must be installed near an easily accessible socket outlet. Permanently
connected equipment must have a readily accessible disconnect device incorporated in the
fixed wiring.

USA

If the scale is connected to a 240V supply, the receptacle must be protected by a 15 amp circuit
breaker.

Safe use

CAUTION:

To avoid the possibility of electric shock or damage to the machine, always switch off the machine

and isolate it from the power supply before carrying out any routine maintenance.

To avoid the risk of the machine falling, where applicable, ensure that it is placed securely on a
flat and level surface.

Take care when placing large, heavy produce such as water melons on the weigh plate so that
they do not roll off the machine.

Training

Do not attempt to operate or carry out any procedure on a machine or network unless you
have received the appropriate training or have read the instruction books.

Ergonomics

To avoid the risk of RSI (Repetitive Strain Injury) it is important to ensure that the machine is
placed on a surface which is ergonomically satisfactory to the user. It is recommended that
frequent breaks are taken during prolonged usage.

EMC compliance

WARNING: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

«
...
2
3
4
5
6
...
»

Summary of Contents for Xtra Series









































































































































Reviews:

No comments

Related manuals for Xtra Series

Brand: A&D Pages: 76

Brand: A&D Pages: 6

Brand: OHAUS Pages: 20

Brand: OHAUS Pages: 104

Brand: OHAUS Pages: 4

Brand: OHAUS Pages: 104

Brand: OHAUS Pages: 2

Brand: J-Scale Pages: 2

Brand: Zelmer Pages: 32

Brand: Eldom Pages: 7

Brand: Beurer Pages: 16

Brand: Sartorius Pages: 12

Brand: Givi Misure Pages: 12

Brand: Zelmer Pages: 48

Brand: nedis Pages: 3

Brand: MOB Pages: 24

Brand: OBH Nordica Pages: 32

Brand: UFESA Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands