Consignments
3. Back of Store Operations
36
4.
Select the consignment from the list of available consignments and press
Start
.
5.
The scale will switch automatically to Pack Run Mode and you can then select the
appropriate products to begin packing.
The PLU screen will show the details of the consignment, the total number of packs remaining
and the remaining amounts to complete each level. Any targets that are not set will be
displayed as ---. At the start of the consignment the value will be the set targets and will
decrease as the consignment progresses.
When the remaining amounts for a level reaches 0 the level is complete and a level total label
will be printed. In the latter case, the user may choose not to print the label and exceed the
amounts for that level.
The ‘Complete’ button may be used to complete any level before the target amount has been
reached. When higher levels are completed then any lower levels that are still in progress are
also automatically completed and level total labels printed.
When all levels have been completed the consignment is set to
Completed
. Pack run mode is
cancelled and the scale returns to the home screen.
•
The ‘Reprint’ button may be used to re-print the last label without affecting the
consignment totals. This may be necessary if the previous label is spoilt.
•
The Undo Last button will allow you to remove any accidental transaction. Only the last
transaction performed will be removed.
•
Active consignments may be paused to allow customers to be served and Resumed later.
Reviewing Consignments
The current state of all the consignments may be reviewed by cancelling the PLU and using the
consignment function. Completed consignments should be deleted to keep the number of
consignments to a manageable number. Note completed consignments are automatically
deleted when a consignment totals are printed and cleared at the end of the day.