35
-
Send E-mail
Send an electronic text message. To setup click
Detail
(see also
Chapter
4.9.4
).
-
File Transmission via FTP
Upload file to remote computer thru FTP (File Transfer Protocol). To setup
click
Detail
(see also
Chapter 4.9.5
).
-
Start Recording
Record the video from the selected camera. To setup click
Detail
(see also
Chapter 4.9.6
).
-
SMS (Short Message Service)/MMS (Multimedia Messaging System)
SMS transmits only text messages to mobile phone. MMS transmits text
messages and images over wireless networks using the wireless application
protocol (WAP). Make sure your mobile phone support this feature and your
PC is connected to GSM/GPRS modem. To setup click
Detail
(see also
Chapter 4.9.7
).
-
PTZ preset point
Position the PTZ camera based on the preset point setting. To setup click
Detail
(see also
Chapter 4.9.8
).
-
Alarm SOP (Standard Operation Procedure)
List the instructions to inform the person of what to do when the alarm is
activated. To setup click
Detail
(see also
Chapter 4.9.9
).
-
Send to CMS (Central Management System)
Enable/disable the selected camera to send video to CMS when the alarm is
activated (see also
Chapter 4.9.10
)
-
Launch Program
To call up the external program that is provided by 3
rd
party. Click
Detail
and
click
to locate the program path. Enable
Multiple instance
check box to
allow the program can be executed many times at the same time.
4.9.1 To Setup Alarm Relay:
1. Beside the Relay Output check box, click
Detail
.
2. In the Alarm Relay dialog box, select from the
available relay list and in the ON column, set to
enable/disable the relay operation when the alarm is
activated.
3. In the Retrieve time check box, you may
enable/disable to extend the relay operation time and
set the duration in second.
4. Click
OK
to exit and accept the setting and
Cancel
to
exit without saving the setting.
