32
5. If you do
NOT
want to keep the recorded file in the storage folder, enable
Delete
files after Backup
check box.
6. Click
to set the path on where to store the backup file.
7. Click
to start archiving the selected file.
8. In the Processing… dialog box, to stop archiving press
Abort
. When done, in the
Backup Path list, shows the archived item. To burn the file in CD, you need to
have NERO 6 or above installed in your PC then select the item in the list and
click
Burn
. Click
Exit
to end this procedure and burn it later.
9. In CD/DVD Backup, enable/disable Delete file after burning check box to remove
the archived file after burning. Click
Burn
to start and
Exit
to cancel this process.
4.7 Sensor Setting
The I/O device must be installed to use this function.
To Set the Sensor Setting:
1. Click the drop-down list and select the sensor ID
number.
2. Enter sensor name.
3. The system automatically detects the card and input
number. In the Content section, enter sensor
description.
4. In the test section, click
Test
to check the sensor status.
Red is high and Green is low.
5. Click
OK
to exit and accept the setting and
Cancel
to
exit without saving the setting.
