Procedure
1. Use a pencil to mark two screw holes that are vertically spaced at 4 inches apart.
4.00 in
(101.6mm)
Rubber wedge
2. Drill holes and use a Phillips-head screwdriver to install the screws in the wall.
3. Attach the rubber wedge to the back of the Avaya Vantage
™
device towards the base as
shown in the above image.
The rubber wedge has a self-adhesive area that you can attach to the surface of the
device. It stabilizes the wall-mounted device to prevent movement when you touch or tap
the screen.
4. Plug the Ethernet cable to the LAN port on the rear panel of the device.
5.
(Optional)
If you are using an external power supply or an RJ9 headset, connect the
power adapter cord or the headset to the device.
These ports are on the rear panel of the device, which are not accessible when the device
is wall mounted. Therefore, carry out this step before you mount the device.
6. Close the device stand to make it rest on the rubber wedge.
7. Place any dangling cables through the cable-access openings at the bottom of the stand
and around the rubber wedge.
Wall mounting options for Avaya Vantage
™
April 2021
Using Avaya Vantage
™
45
