The rubber wedge has a self-adhesive area that you can attach to the surface of the
device. It stabilizes the wall-mounted device to prevent movement when you touch or tap
the screen.
2. Plug the Ethernet cable to the LAN port on the rear panel of the device.
3. Pass the Ethernet cable through the middle gap of the stand and connect the other end to
the wall jack.
Middle opening on
the stand to pass
the Ethernet cable
Ethernet cable with
RJ45 connectors
If you use a short cable as suggested, you can fold the extra length of the cable in the
space between the stand and the unit.
4.
(Optional)
If you are using an external power supply or an RJ9 headset, connect the
power adapter cord or the headset to the device.
These ports are on the rear panel of the device, which are not accessible when the device
is wall mounted. Therefore, carry out this step before you mount the device.
5. Close the device stand to make it rest on the rubber wedge.
Wall mounting options for Avaya Vantage
™
April 2021
Using Avaya Vantage
™
47
