Unified Communications Module Installation and Maintenance
Page 96
15-601011 Issue 03l (28 August 2012)
IP Office
8.3.3 Configuration Commands
The Configure> prompt is accessed by entering configure at the
Admin> prompt
and then entering the configurator
password (the default password is Configurator).
In the commands below, <application> is replaced with name of the required application: voicemail, onexportal,
watchdog or all.
At the Configure> prompt, the following commands can be used:
·
autostart <application> <on/off>
Change the autostart settings of an application.
·
backup <application>
Backup the application. This command is currently only supported for the onexportal application.
·
exit
Exit the Configure> prompt and return to the
Admin>
command prompt.
·
help
Display general help on entering commands.
·
history
Display the history of commands used in the current session.
·
list
Display a list of commands.
·
logout
End the session and logout.
·
password
Change the configuration password required to access the Configure> prompt.
·
install <application>
Install an application from the repository.
·
repository <type> <link>
Set the location for the updates repository.
·
The <type> value indicates the repository:
·
os
Operating system repository.
·
services
Applications repository.
·
The <link> value indicates the repository location.
·
restore <application>
Restore an application. This command is currently only supported for the onexportal application.
·
search
Search for an application and display basic information if found on the server.
·
show
Display a list of installed applications.
·
startup <application> <on/off>
Set the start on boot up setting for an application.
·
uninstall <application>
Uninstall an application.
·
top
Return to the
>
prompt.
95
95
93