manualshive.com logo in svg

Avaya UC, Installation And Maintenance Manual, Page: 55 / 102

Share
Download
Avaya UC Installation And Maintenance Manual Download Page 55

Unified Communications Module Installation and Maintenance

Page 55

15-601011 Issue 03l (28 August 2012)

IP Office

Server Maintenance: Upgrading Applications

5.8.2 Upgrading Application Files

Where multiple versions of a software component are available to the server, the web menus can be used to update or
change the current version installed.

1.

Login

 to the server's web configuration pages. 

2. Select the Updates page. 

3. The Services section displays the current version and latest available version of each application service. 

·

Some applications may not support upgrading or downgrading whilst the application is currently installed. For
those applications, the Change Version and Update buttons remain greyed out even if there are updates
available in the application file repository. These applications must first be uninstalled using the Uninstall
button before the Change Version and Update buttons become useable. 

4. Select one of the following actions:

·

To update an application to the latest version available, click on Update. 

·

To update all applications to the latest version available, click on Update All. 

·

To change the current version of an application, click on Change Version. Select the version required and
click Apply.

47

Summary of Contents for UC







































































































Reviews:

No comments