manualshive.com logo in svg

Avaya UC, Installation And Maintenance Manual, Page: 57 / 102

Share
Download
Avaya UC Installation And Maintenance Manual Download Page 57

Unified Communications Module Installation and Maintenance

Page 57

15-601011 Issue 03l (28 August 2012)

IP Office

Server Maintenance: Uninstalling an Application

5.10 File Repositories

The 

Updates

 and 

Web Client

 menus use files stored in the configured file repositories. Each repository can be

either a set of files uploaded to the sever or the URL of a remote folder on an HTTP server. 

You can add files to these repositories without affecting the existing operation of the server. However when the application
or operating system repositories contain later versions of the files than those currently installed, a 

 icon is displayed on

the Updates menu.

5.10.1 Source Files

Update files may be made available individually in response to particular issues or to support new IP Office releases. The
files are also included on the Unified Communications Module DVD. Files can be extracted from a DVD .iso image using an
application such as WinZip.

·

Warning 
Before upgrading or changing the version of any installed application or operating system components, you must
ensure that you have read the appropriate Avaya Technical Bulletins for the software release. The Technical
Bulletins detail supported versions of software and known issues or additional actions required for upgrading. 

File Type

DVD/.iso Folder

Application Files

Voicemail Pro

.rpm

\AVAYA\VMPro

one-X Portal for IP Office

.rpm

\AVAYA\ONEX

Windows Client Files 

.exe

\AVAYA\THICK_CL

Operation System Files

.rpm

\CENTOS

·

Voicemail Pro 
Each version of the Voicemail Pro server application is split into separate .rpm files for the server and each of
the prompt languages it supports. Unless advised otherwise, you should copy or upload the full set of files to
the file repository.

5.10.2 Setting the Repository Locations

The Unified Communications Module can use either remote or local software repositories to store software update files.
Separate repositories are configured for operating system updates, IP Office application installation files and Windows
client files. 

The files uploaded or present in the file repositories are used by the 

Updates

 and 

Windows Clients

 menus. 

·

Repository 
If the Local option is not selected, this field is used to set the URL of a 

remote HTTP file repository

. Note that

each repository must be different, the same URL must not be used for multiple repositories. 

·

Local 
This checkbox is used to set whether the file repository used is local (files stored on the Unified Communications
Module or remote (a folder on a HTTP web server specified in the Repository field). 

·

File / Browse / Add 
If the Local option is selected, this field and adjacent buttons can be used to browse to a specific update file. When
the file is located and selected, click Add to upload the file to the file store on the Unified Communications Module.

66

73

66

73

59

Summary of Contents for UC







































































































Reviews:

No comments