manualshive.com logo in svg

Avaya UC, Installation And Maintenance Manual, Page: 66 / 102

Share
Download
Avaya UC Installation And Maintenance Manual Download Page 66

Unified Communications Module Installation and Maintenance

Page 66

15-601011 Issue 03l (28 August 2012)

IP Office

6.3 Updates

This page displays the different versions of Unified Communications Module operating system files and application files
available in the file repository. The file repository locations are configured through the 

Settings | General

 page. 

·

Warning 
Before upgrading or changing the version of any installed application or operating system components, you must
ensure that you have read the appropriate Avaya Technical Bulletins for the software release. The Technical
Bulletins detail supported versions of software and known issues or additional actions required for upgrading. 

The menu is divided into 2 sections: 

·

Services

 

This section displays the current version of application files and whether update files are available.

·

System

 

This section displays the current version of the operating system and whether update files are available. 

69

67

68

Summary of Contents for UC







































































































Reviews:

No comments